       
Sherbourn Technologies
19-3A Sterling Road,
North Billerica, MA 01862
(978) 663-7385
sherbourn@sherbourn.com |
Uniquely Configurable
2U Cooling Unit
In an age of inconspicuous consumption, where more
and more electronic installations are being concealed in cabinets
or cupboards, heat
has become a major factor. Heat is the enemy of all electronic
components and is a major contributor to poor reliability. Housed
in a rack-mountable chassis, Sherbourn’s innovative C12 cooling
unit is designed to permit multiple configurations for pointing
the cool air emanating from its three thermally governed fans into
any direction including the outside—you make the decision
based upon your needs. The C12 has a low voltage trigger, a built-in
thermal and/or pigtail sensor, a minimum temperature activation
switch and a synch switch in case you want two fans.
No other fan system offers the flexibility of Sherbourn’s,
with its ability to move over one hundred cubic feet of air
per minute in a whisper-quiet and efficient manner.
 Features
- Housed in a 2" high rack-mountable chassis
- Contains three
whisper-quiet 4.75 inch fans
- Features an embedded thermal
sensor
- Front panel has a master power switch and blue LED
lights
- Front panel contains an air filter to filter incoming
air should a front intake be operational
- Rear panel has a
12 volt trigger, a two-position switch for setting the minimum
starting temperature switch, a synch
switch should a particular installation require two fans, an input to accept
the pig tail thermal sensor and two exhaust ports
- Minimum
temperature start switch can be set to either 95 or 194 degrees
Fahrenheit
- Includes a magnetic pig tail thermal sensor
for use when one wants to measure the temperature at the “hot
spot” of
the installation.When used, this sensor will
over-ride the one embedded in the chassis
- Can
be mechanically configured to allow the air
flow to be front exhaust, rear exhaust, top
exhaust with a front
entry or top exhaust with a bottom entry
- Contains two exhaust ports should the
hot air need to be directed to the outside
- Optional exhaust
hose kit for use in directing the air to the outside
 Specifications
Carton weight: 9 lbs (4.1 kg)
Configuration: Three 3.75" thermal sensing fans that
can be configured to intake or exhaust
12 volt trigger: Selectable Thermal Switch:The three fans can
activate at two different ambient room temperatures
Synch switch: Allows two units to operate at similar speeds
Pig-Tail remote temp. sensor: Governs fan speed from the “hot
spot” of the installation
Optional exhaust hose kit: Allows hot air to be drawn from the
installation to an alternative location
Chassis Dimensions: 15.7" W x 8.75" D x 2.25" H
(400mm x 222mm x 57mm)
Rack mount panel dimensions: 19"W x 3.75"H (attaches
to front panel of fan chassis) (483mm x 95mm)
More
Products
|
|
|
